Briggs & Stratton FW25KAV1552 Lawn Mower Manual

The Briggs & Stratton FW25KAV1552 is a powerful lawn mower designed for efficient grass cutting with a 25-inch cutting deck. It features a reliable Briggs & Stratton engine, adjustable cutting heights, and a user-friendly design for easy operation. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: 25-inch cutting deck, Briggs & Stratton engine, adjustable height settings, ergonomic handle, and easy-start system.

Installation

Unpack and inspect the mower. Ensure all parts are included and undamaged.

1. Attach the handle: Align and secure the handle to the mower body.
2. Check oil level: Ensure the engine oil is filled to the recommended level.
3. Fill fuel tank: Use fresh gasoline to fill the tank.
4. Inspect blades: Ensure blades are sharp and properly installed.

WARNING! Always follow safety precautions when handling the mower.

First-Time Setup

Power on the mower; follow the setup instructions provided in the manual.

1. Adjust handle height: Set the handle to a comfortable height for operation.
2. Check safety features: Ensure all safety mechanisms are functional.
3. Test start: Start the mower to ensure it operates correctly.

CAUTION! Always read the manual before operating the mower.

Specifications

• Engine Type: Briggs & Stratton, 4-cycle.
• Cutting Width: 25 inches.
• Height Adjustment: 6 positions (1 inch to 4 inches).
• Fuel Capacity: 1.5 gallons.
• Weight: 90 lbs.
• Starting System: Recoil start.
• Warranty: 2 years limited warranty.

Controls and Settings

Access controls via the ergonomic handle. Features include throttle control, choke, and safety switch.

Throttle Control: Adjusts engine speed for optimal performance.

Choke: Used for starting the engine in cold conditions.

Safety Switch: Must be engaged for the mower to operate.

Connecting Devices

Ensure all connections are secure before starting the mower.

1. Check fuel and oil levels before operation.
2. Ensure the mower is on a flat surface for stability.
3. Connect any additional accessories as per the manual instructions.

Tip: Always perform a safety check before mowing.

Operating the Mower

Follow these steps for safe and effective mowing.

1. Start the mower: Engage the safety switch and pull the starter cord.
2. Adjust speed: Use the throttle control to set the desired speed.
3. Mow in straight lines: Overlap each pass for even cutting.
4. Stop the mower: Release the safety switch to turn off the engine.

WARNING! Always be aware of your surroundings while mowing.

Maintenance Features

Regular maintenance is essential for optimal performance.

1. Check oil level regularly and change as needed.
2. Sharpen blades at least once a season.
3. Clean air filter and replace if necessary.
4. Inspect belts and cables for wear.

CAUTION! Always disconnect the spark plug before performing maintenance.

Care & Cleaning

Unplug and clean the mower after each use. Use a dry cloth to wipe down surfaces.

CAUTION! Avoid using water or cleaning agents on the mower.

Regulatory Information

This mower complies with all applicable safety standards. For support, visit www.briggsandstratton.com or contact customer service.

Troubleshooting

Reset: Refer to the manual for reset instructions if available.

Service: For assistance, contact Briggs & Stratton customer service.