Briggs & Stratton Conquest 400 Series lawn mower manual

The Briggs & Stratton Conquest 400 Series lawn mower is designed for efficient grass cutting with a powerful engine, adjustable cutting heights, and user-friendly features. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

Key features include a durable steel deck, adjustable cutting height, and a powerful Briggs & Stratton engine for reliable performance.

Feature	Description
Engine	Briggs & Stratton 400 Series engine for reliable power
Cutting Height Adjustment	Easy lever adjustment for various grass lengths
Steel Deck	Durable construction for long-lasting use
Grass Bag	Large capacity for efficient grass collection
Wheels	Large rear wheels for better maneuverability

Safety Information

Read all safety instructions before operating the mower. Always wear appropriate footwear and eye protection.

Keep hands and feet away from the cutting area.
Do not operate the mower in wet conditions.
Ensure all safety guards are in place before use.

WARNING! Failure to follow safety instructions may result in serious injury.

Operation Instructions

To start the mower, ensure the throttle is in the correct position and pull the starter cord firmly.

Check oil level before each use.
Adjust cutting height as needed.
Start mowing from the edge of the lawn and work inward.

CAUTION! Do not leave the mower unattended while running.

Specifications

Engine Type: Briggs & Stratton 400 Series.
Cutting Width: 21 inches.
Cutting Height: Adjustable from 1 to 4 inches.
Fuel Type: Unleaded gasoline.
Weight: 70 lbs.
Warranty: 2 years limited warranty.

Maintenance

Regular maintenance is essential for optimal performance. Follow these guidelines:

Change oil every 50 hours of operation.
Clean or replace air filter as needed.
Sharpen blades at the beginning of each season.

Tip: Always refer to the manual for detailed maintenance instructions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Mower won't start	Fuel issue	Check fuel level and ensure it's fresh.
Uneven cut	Blade issue	Sharpen or replace blades as necessary.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Engine overheating	Oil level low	Check and refill oil as needed.

Reset: Follow the manual for resetting the mower settings if applicable.