Briggs & Stratton 2691397-00 Lawn Mower Manual

The Briggs & Stratton 2691397-00 is a reliable lawn mower designed for efficient grass cutting and maintenance. This manual provides essential information on safety, features, operation, maintenance, and troubleshooting to ensure optimal performance and longevity of your lawn mower.

1. Features at a Glance 2. Safety Information 3. Operation Instructions 4. Specifications 5. Maintenance 6. Troubleshooting

Features at a Glance

This lawn mower features a powerful Briggs & Stratton engine, adjustable cutting height, and a durable steel deck for long-lasting performance.

Feature	Description
Engine	Briggs & Stratton 140cc engine for reliable power
Cutting Width	21 inches for efficient grass cutting
Cutting Height Adjustment	5 positions for customized grass length
Deck Material	Durable steel for enhanced longevity
Weight	Approximately 60 lbs for stability

Safety Information

Always wear appropriate safety gear, including gloves and eye protection. Read the manual thoroughly before operating the mower.

WARNING! Keep hands and feet away from the cutting blade while the engine is running.

Operation Instructions

To start the mower, ensure the fuel tank is filled and the oil level is adequate. Follow the steps below:

Check the oil level and add oil if necessary.
Fill the fuel tank with fresh gasoline.
Set the throttle to the "Start" position.
Pull the starter cord to start the engine.
Adjust the cutting height as needed.

Specifications

Engine Type: Briggs & Stratton 140cc
Cutting Width: 21 inches
Cutting Height: Adjustable from 1 to 4 inches
Fuel Capacity: 1.5 quarts
Oil Capacity: 0.5 quarts
Weight: 60 lbs

Maintenance

Regular maintenance is crucial for optimal performance. Follow these guidelines:

Change the oil every 50 hours of operation.
Clean or replace the air filter as needed.
Sharpen the cutting blade regularly.
Inspect and replace spark plug annually.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Engine won't start	No fuel	Check fuel level and refill if necessary.
Uneven cutting	Blade dull	Sharpen or replace the cutting blade.
Excessive vibration	Loose parts	Tighten all screws and bolts.
Engine overheating	Low oil level	Add oil to the engine.

Service: For further assistance, contact Briggs & Stratton customer support.